{{indexmenu_n>2}}

====== Configuration Defaults ======
===== Weather Routing Plugin =====
The following is a list of the default **Configuration** Constraints and Options. Use this list to check your settings if you are having trouble.

=====Basic Tab =====
===Start===
===End===
===Date===
===Time===
===Boat===
  - Boat.xml path
  - Boat.xml edit
===Constraints===
  - Max Diverted Course 76 degrees
  - Max True Wind 100 knots
  - Max Apparent Wind 100 knots
  - Max Swell 20 meters - Ordered List Item
===Options===
  - Time step 1 hour 0 min 0 sec
  - Detect Land Checked (when first starting, uncheck it)
  - Detect Boundary Unchecked
  - Currents Unchecked
  - Optimize tacking Unchecked
===Data Source===
  - First use a freshly downloaded grib of the entire route area (a little larger than then route), making sure that it is for a big enough time interval. Then set the Grib_pi at least one frame later than the start time.
  - Grib Unchecked - You will need to check this.
  - Climatology Disabled - You can leave this disabled when you are starting. You can run routes using Climatology alone, or you can use the 30 year Noaa data averages to extend calculations for a long trip both at the start and finish. There will be an indicator on the preferred route when the data source changes.
  - Last Valid if Data Deficient - Unchecked If your grib file is not long enough checking this can help.

=====Advanced Tab =====
=== Constraints ===
  - Max Latitude 90 degrees
  - Wind vs Current 0 (disabled) Factor for waves and hobby horsing
  - Max Course Angle 180 degrees
  - Max Search Angle 120 degrees
  - Cyclones  Avoid Crossing Cyclone Tracks Unchecked within X months X days 1 month 0 days
=== Options ===
  - Inverted Regions Unchecked
  - Integrator Newton
  - Anchoring Unchecked
  - Wind Strength is 100 percent
  - Tacking Time 0 (disabled)
  - Safety Margin from land 0 nm
  - Courses Relative to True Wind from 0 degrees to 180 degrees by 5 degrees

If you are having trouble, set the Configuration to these defaults or select Configuration > **Reset All Advanced**:

//**Boat**  //

